By Ezra Lane The C1164 code on your Nissan indicates a fault with the Cut Valve 1 in the ABS, critically affecting brake fluid flow and braking efficiency. You'll likely notice symptoms such as an illuminated ABS light, uneven braking, and increased stopping distances, all of which pose serious safety risks. This error commonly stems from electrical issues, contaminated brake fluid, or mechanical failure within the valve. To resolve it, diagnose using tools like an OBD-II scanner and multimeter, replace the faulty valve, and flush the system if necessary. Costs for repairs can vary, generally between $250 to $500, dependent on the severity and parts required. Address this fault promptly to ensure your safety and restore your vehicle's optimal braking performance. Further exploration can offer additional insights into maintaining your braking system.
C1164 Nissan Code Meaning
The C1164 Nissan code indicates a malfunction with Cut Valve 1 in the ABS, affecting brake fluid flow and compromising braking.
Causes include a faulty valve, electrical issues, or contamination.
A detailed ABS diagnostic and necessary repairs, such as valve replacement or system flushing, are essential for safety.
Error Code C1164 Symptoms
When your Nissan shows the C1164 error, you'll see the ABS light on your dashboard. This means there's an issue with the brakes, which can impact safety and how well your car drives.
Here are some signs you might notice:
- Soft Brake Pedal: The brake pedal might feel soft or spongy. This can make it hard to know how much pressure to use, leading to less control when braking.
- Uneven Braking: The brakes might work unevenly, or they could lock unexpectedly. This can cause the car to pull to one side or make it hard to drive in a straight line, especially when braking suddenly.
- Longer Stopping Distance: It might take longer to stop the car than usual. This is risky, especially on busy roads or when the weather is bad.
These signs mean there's a safety risk with your car, and it needs to be checked right away to keep it safe to drive.
Causes of Nissan C1164 Fault Code
Nissan's C1164 code means there's a problem with Cut Valve 1 in the brake system. This valve controls brake fluid to the calipers.
Let's look at what might be causing this issue:
- Bad Cut Valve 1: The valve may not work properly, which messes up the fluid flow and affects braking.
- ABS System Electrical Problems: Wires or the control module might've issues. This can cause the circuit to fail sometimes or all the time.
- Brake System Contamination and Damage:
- Dirty Brake Fluid: Unclean fluid can stop the valve from working right.
- Corrosion or Debris: Rust or dirt in the brake lines can block fluid and harm parts like Cut Valve 1.
- Broken Wires: Damage to the wires can make the valve act unpredictably and cause the error code.
Check these parts regularly to avoid the C1164 error in the future.
Tools Needed to Diagnose
To figure out the C1164 Nissan code, you'll need some specific tools. These help you find the problem and check the fix after you're done. Here's what you need:
- OBD-II Scanner
- This tool talks to your car's computer. It reads and clears the C1164 code. It also shows if there are other codes affecting the CVM Circuit.
- Multimeter
- Use this to check the Cut Valve 1 circuit. Test voltage and resistance to make sure all wires are connected and working right. This helps find where something might be wrong.
- Inspection Light
- A flashlight or similar light helps you look at wires and connectors. Check for damage, wear, or rust that might mess up the circuit.
Each tool helps you test and check the C1164 issue before fixing it.
How to Fix C1164 Nissan Error Code – Step by Step
Step 1:
Begin by thoroughly inspecting the wiring and connectors linked to Cut Valve 1. Look for any signs of damage, corrosion, or loose connections.
These issues can significantly impact the system's performance, so it's crucial to address them first.
Step 2:
Replace the faulty Cut Valve 1. Opt for a new OEM or high-quality aftermarket part to ensure compatibility and reliability within the braking system.
Installing the correct part is vital for the system's overall functionality.
Step 3:
Bleed the brake system. This process removes any air bubbles that might've entered during the repair, which can compromise brake performance.
Make sure to follow the manufacturer's guidelines for bleeding to ensure it's done correctly.
Step 4:
Clear the diagnostic trouble codes from your vehicle's computer system.
This reset helps verify that the issue was fixed.
Step 5:
Test drive the vehicle to ensure the braking system is functioning correctly and that the C1164 error code doesn't reappear.
Common Diagnosis Mistakes
When dealing with the C1164 error code in a Nissan, don't overlook electrical issues in the ABS system. Here are common mistakes to avoid:
- Wiring Problems
- Check the wiring harness for corrosion or damage. These issues can cause problems with the cut valve.
- Brake Fluid Issues
- Look closely at the brake fluid for any contamination. This can affect how the valve works.
- ABS Warning Lights
- An ABS warning light doesn't always mean the Cut Valve 1 is faulty. More tests are needed to find the real problem.
After any fix, bleed the brake system properly to remove air bubbles. This ensures the brakes work well and prevents ongoing issues.
C1164 Nissan Repair Cost
Fixing the C1164 code on a Nissan can cost between $250 and $500.
The total cost depends on your car's make and model, including parts and labor.
Parts for the Cut Valve 1 typically range from $150 to $300.
You can choose between original manufacturer parts or cheaper aftermarket options.
Labor costs for diagnosing and fixing this issue usually fall between $100 and $200.
The time and complexity of the work affect these charges.
If your car has other issues like brake fluid contamination or wiring problems, costs might go up.
To get an accurate cost estimate, visit a trustworthy repair shop.
They can give you a detailed quote based on your car's needs.
It's wise to get a few estimates since prices can differ.
Related Error Codes on Nissan
If you're dealing with a C1164 error code on your Nissan, you might also see codes like C1101, C1102, and C1103. These codes point to issues in the ABS and braking system. They show that there could be several problems with your car's brakes.
Understanding these codes is important as they highlight specific issues that can affect your car's safety. For example, code C1101 is about a problem with the front right sensor. C1102 and C1103 relate to the front left and rear sensors. Here's a simple table for better understanding:
| Code | Description | Potential Impact |
|---|---|---|
| C1101 | Front Right Sensor Problem | Less effective braking |
| C1102 | Front Left Sensor Problem | Higher chance of skidding |
| C1103 | Rear Sensor Problem | Unsteady braking performance |
These error codes, along with C1165 and C1166, are not just random numbers. They are alerts that something might be wrong with your vehicle. Checking them out and getting help can keep your Nissan running safely.
Can I drive safely with C1164 Nissan?
Driving with a C1164 Nissan code isn't safe.
This code means there's a problem with the brakes. Your car mightn't stop as it should, which can be dangerous.
You should get it fixed by a mechanic before driving again.
People Also Ask
Is C1164 a Common Issue Across All Nissan Models?
The C1164 issue is not found in all Nissan cars. It mostly happens in models with fancy ABS systems, like the Altima, Maxima, and Rogue. Other Nissan models with regular care and maintenance might not have this problem as much.
Does Weather Affect the C1164 Nissan Error Occurrence?
Yes, weather can cause the C1164 Nissan error. Very hot or cold weather and lots of moisture can affect car parts. Bad weather like storms might put dirt or leaves in brake lines, which can make this error happen.
Can Aftermarket Parts Trigger the C1164 Code?
Yes, using aftermarket parts can cause the C1164 code if they don't match your car's needs, especially in the braking system. It's important to use good quality parts made for your car model to avoid problems.
Are There Any Recalls Associated With the C1164 Nissan Code?
There are no specific recalls for the C1164 Nissan code. It's best to check the NHTSA website for any updates on recalls. Also, ask a Nissan dealership for the most current and accurate information about your car.
How Often Does the C1164 Error Reoccur After Initial Repair?
The C1164 error can come back often if problems like bad wires or dirty brake fluid aren't fixed. Using good parts and keeping up with regular car check-ups helps a lot. Make sure to bleed the brakes right after fixing them.